Godox X1R RX TTL Wireless Flash Trigger Receiver

Features :

● Built-in 2.4G Wireless Transmission :Built-in 2.4G wireless transmission provides 100 further transmission distanceand creative triggering methods.

● Fully Supporting TTL Functions : Supportfor E-TTL II autoflash, 1/8000s High-speed Sync, Flash Exposure Compensation,Flash Exposure Lock, Modeling Flash, etc.

● Wireless Remote Control and GroupingSystem : With GR group flash and wireless grouping system (max. 5 groups &32 channels) and triggering the flash.

● Big and Clear LCD Panel Transmitter andreceiver both have backlight LCD panel to offer convenient operation.

● Versatile functions such assynchronization delay setting, wireless shutter release, zoom setting, etc. PCsync socket to input and output; receiver use 2.5mm sync cable to output.

● USB firmware upgrades helps keep Pacewith the latest .1...g, Useful memory function that settings will be stored 2seconds after the last operation and recover after a restart.

Specifications :

● Builted-in remote system : 2.4G WirelessTransmission

● Modulation mode : MSK

● Power supply : 2 * AA batteries

● Manual flash : Yes

● TTL autorlash : E-TTL II

● High-speed sync : Yes

● Flash exposure compensation : Yes, ± 3 stops in 1/3 stop increments

● Flash exposure lock : Yes

● Focus assist : Manual open

● Second curtain sync : No

● Modeling flash : Yes, fired withcamera's depth-of-field preview button

● Wireless flash function : Support forFlash Ratio (A: B C),Support for GR group flash

● Controllable slave group : In the GRgrouping mode, 5 (A / B / C / D / E),In the Ratio grouping mode, 3 (A / B /C),Transmission range (approx.)> 100m

● Channel: 32

● High-speed sync delay set : Yes(0-19.9ms, use 100us as the unit)

● Wireless shutter release : Receiver cancontrol camera shooting through 2.5mm sync port

● ZOOM setting : Adjust the flash's focallength through the transmitter

● LCD panel : Wide LCD panel, backlight on/ off

● Output Interface:Transmitter : use a PCcord to input and output;Receiver: use a 2.5mm sync cord to output

● Firmware upgrade : Use the Micro USBport to upgrade

● Memory function : Settings will bestored 2 seconds alter last operation and recover after a restart