This PixelBrick 8-Light Kit with Accessories from Astera features eight PixelBrick 15W RGB LED fixtures, each with a BrickConnect, a FloodFilter, and a BeamSoftener. A charging case, powerbox, and powerCON TRUE 1 cable are also included.
The diminutive 3.6 x 3.6 x 3.7" PixelBrick was designed with power, color, and control options. The light has a color temperature of 3200-6500K with a high CRI/TLCI rating of 96 - your assurance of accuracy in the reproduction of colors. It also has an RGB mint amber mode. Making a selection from the 360° color wheel, and tweaking the hue, saturation, and intensity gives you access to literally millions of colors. You can make adjustments on the fixture of course, but you also operate the PixelBrick remotely from a wired DMX console, or wirelessly via DMX and LumenRadio CRMX. There's also a Bluetooth app for wireless control with your smartphone. The PixelBrick has an internal battery that will give you 20 hours of runtime on a four-hour charge.
Detect all available lights, set them up, check their status, and configure DMX addresses / DMX profiles.
Quickly build programs out of colors and effects, trigger them, or make them match a beat. Create complex programs out of colors, effects, and settings. PixelBrick will remember and repeat these effects without requiring a constant wireless link. Quickly create groups of lights, assign positions, and select which light should receive commands.
Keep a complete overview of the status and all settings of your PixelBrick while you operate it. View battery status, radio signal, DMX address, and which lights you have targeted.Diagnose individual PB15 PixelBrick and get informed if a light is being moved or switched off. This works while you control lights by the app but also if PB15 PixelBrick is controlled via DMX.
The AsteraBox works as a wireless DMX transmitter; just connect it with the included XLR adapter to your DMX console and you can transmit 1 DMX universe with CRMX technology, the most stable wireless DMX protocol available. The most reliable wireless DMX module on the market compatible with CRMX and other wireless DMX standards is included.
Switch lights into power saving standby and schedule them to wake up when the production starts.
The lights send visual and audible alarms and notifications to the Astera app if they are being moved during an event.
Set the length of your production and be sure that your lights won't run out while getting the maximum brightness.
Scrambled PWM technology thwarts flickering when filming.
This exclusive feature allows the light to display the maximum brightness at all times and intensify non-white colors.
Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.
Individually calibrated lights lead to 100% color consistency and exact color reproduction of color temperature and filter gels.
Adjust green/magenta during content creation to reduce post production work.
Switches to white light when AC power is cut to keep your event safe.
Set up your film light at a distance. Set DMX address and DMX footprint for one or several PB15 PixelBricks. Fifty units can be prepared in less than five minutes. After your job, do a quick master reset of all settings or a partial one of only selected settings.
●PixelBrick LED Light Features
●Combine several units into a cluster
●Create shapes using various mounting accessories
●Titan LED Engine
●Filters and Dome create different beams and looks
●AirlineTrack for accessories
●Backside display with dedicated Color and Brightness buttons
●Direct App Control (No AsteraBox required)
●Charging Case Features
●Included power supply for charge 8 tubes from one AC outlet
Titan LED Engine
Colors：RGB Mint Amber
Total LED Power：15W
Light output： 2700K, 3200K, 5500K: 388lm, 450lm, 375lm
CRI(Ra)/TLCI 3200-6500K： >=96
Beam Angle：13 Degree
Strobe：0 - 25Hz
Wired DMX：Yes (via PWB-2-86)
Wireless Frequencies：CRMX 2.4GHz, UHF, Bluetooth
Range (m/yds)：300 / 330yds
Battery Lifetime：70 % after 300 cycles
Battery Runtime：Up to 20 hours
Charging Time ( nominal )：4 hrs
Ambient Temperature：32 Degree - 104 Degree F ( 0 Degree - 40 Degree C )
Dimensions：91 x 91 x 94mm