Description
Features：
●The transmitter is equipped with a built-in microphone and a 3.5mm mic input that accepts the included lavalier microphone.
●For a truly wireless experience, the transmitter can be clipped on clothing without having to wire yourself or your talent. You can also hold the transmitter in your hand and use it as a handheld microphone.
●The On/Off switch doubles as a mute button.
●For a more discreet setup, use the small lavalier microphone, which can be easily concealed away from the camera's eye.
●This plug-and-play system is easy to use.It comes pre-paired at the factory; connect it to your phone, turn it On, and you're ready to start recording.
●Dedicated gain buttons on the receiver allow quick and effortless adjustment of the signal level for each microphone independently.
●The transmitter has a display that shows signal strength, audio level, mono/stereo configuration, and battery life.
●The transmitter is powered via a built-in lithium-ion rechargeable battery. It can also be powered via USB, even while in use, giving you near unlimited operating time.
●The receiver is powered via the phone.
●If you need to expand your system with a second microphone, the two-channel receiver allows you to save space on your shooting rig by using a single receiver to simultaneously receive signals from two mic/transmitters.
●You have the option to switch between mono or stereo on the receiver: Recording in mono combines both microphones on both the left and right side of your audio track. Recording in stereo puts one person on the left and the other person on the right, allowing you to iso lateeach person's dialog and adjust each level individually later in post.
●Whereas typical analog wireless systems are susceptible to interference from TV and radio waves, the BoomX-D digital system avoids that by operating in the 2.4 GHz frequency band, which occupies frequencies beyond those of television, radio transmissions, and UHF wireless microphone systems.
●The system automatic changes transmission frequency to mitigate noise and dropouts at a line-of-sight distance of up to164 feet. For optimal performance, environments with limited Wi-Fi/2.4 GHz traffic and minimal physical obstructions are recommended.
Specification：
System
Wireless Transmission：Digital 2.4 GHz
Included Transmitters：2 x Clip-On with Microphone
Diversity：Non-Diversity
RF Frequency Band：2400 to 2483.5 MHz
RF Channel Scanning：Auto-Scan
Max Operating Range：164' / 50 m (Line of Sight)
Max Systems per Setup：2
Sample Rate/Resolution：48 kHz / 16-Bit
Receiver
Form Factor：Plug-In
Mounting Options：Plug-In
Antenna：1 x Internal
Number of Audio Channels：2
Audio I/O：1 x1/8" / 3.5 mm TRS Female Unbalanced Headphone Output
Gain Range：0 to 12 dB
USB/Lightning Connectivity：1 x USB Type-C (Audio, Bus Power)
RF Output Power：10 mW
Power Requirements：Bus Power (USB)
Display & Indicators：1 x LCD (AF Level, Battery Status, Output Level)
Housing：Plastic
Operating Temperature：32 to 122°F / 0 to 50°C
Dimensions：33 x 13 x 70mm
Weight：19 g
Transmitter
Form Factor：Clip-On with Microphone
RF Output Power：10 mW
Audio I/O：1 x1/8" / 3.5 mm TRS Female Unbalanced Input
Muting：Off/On Switch
Auto-Level Control：No
Frequency Response：80 Hz to 20 kHz
Antenna：1 x Internal
Approximate RF Sensitivity：-86 dBm
Battery Type：1 x Built-In Rechargeable
Internal Battery Capacity：300 mAh
Approx. Battery Life：5 Hours (Lithium Rechargeable)
USB/Lightning Connectivity：1 x USB Type-C (Bus Power, Charging)
Display & Indicators：1 x LCD (Audio Level, Battery Status, Mute, Signal Strength)
Housing：Plastic
Operating Temperature：32 to 122°F / 0 to 50°C
Dimensions：1.5 x 0.9 x2.2" / 39 x 22 x 55 mm
Weight：29 g
Microphone
Form Factor：Integrated
Sound Field：Mono
Polar Pattern：Omnidirectional
